T6Racing ChevyII L6 oil pan issues for Non chevyII blocks

Home Lump Porting Gaining CFMs Lump porting Video & tools needed Bell Crank & Carb Plates Heads, InTakes & L6 Accessory's Casting #s,Head C C s L6 Powered Drag Videos T6 B Board Oil Pan & Zbar issues 64 SS chevyII Twisted6 Photos Twisted6 Photos2		The next few photos will show where there is a Drag link issue. For the 62-67 chevyII/Nova bodys,When installing an non chevyII L6 (250 with the rear sump oil pick-up) In between the light blue lines is where the draglink Rubs the oil pan. And needs to be dimpled in. Which can be done with a peice of round bar stock, and a Small hammer. The next two photos will show the oil pans I have started to notch and will also deepen. I will also post some pictures of a crank shaft scrapper & windage tray.For our chevy L6s These oil pans have been C knotched to clear the drag link,With out the power steering unit. This Bracket is needed if you are useing a Non chevyII block and have a Std. tranny. It will put the Z bar ball in the right location for non chevyII L6 blocks.